Questions? Call Us Now!

Questions? Call Us Now!

Building Inspection
and Pest Control in
Perth

Building Inspection
and Pest Control in
Perth

Building Inspection
and Pest Control in
Perth

CASE STUDY

A load bearing hanging beam which no support. An inspection from the manhole (loft hatch) would not have identified this defect so make sure your inspector enters the roof space.

Building Inspection
and Pest Control in
Perth

CASE STUDY

There were dozens of BCA non compliance defects on this roof frame. Upon receipt of the Bestwest Building's report the Builder acknowledged the defects and rectified to satisfy the Building Code of Australia.

Building Inspection
and Pest Control in
Perth

CASE STUDY

This isn't rocket science, a hanging beam is a structural member and clearly this has been compromised.

Building Inspection
and Pest Control in
Perth

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

Building Inspection
and Pest Control in
Perth

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

Building Inspection
and Pest Control in
Perth

CASE STUDY

A Practical Completion Inspection revealed this brickwork which should have been rendered. Not visible from ground level but all part of the inspection process for Bestwest Building.

Building Inspection
and Pest Control in
Perth

CASE STUDY

Do all Building Inspectors review the roof frame! Bestwest Building do and are able to provide a detailed explanation to the defect in this photo!

Building Inspection and Pest Control in Perth

CASE STUDY

A load bearing hanging beam which no support. An inspection from the manhole (loft hatch) would not have identified this defect so make sure your inspector enters the roof space.

CASE STUDY

There were dozens of BCA non compliance defects on this roof frame. Upon receipt of the Bestwest Building's report the Builder acknowledged the defects and rectified to satisfy the Building Code of Australia.

CASE STUDY

This isn't rocket science, a hanging beam is a structural member and clearly this has been compromised.

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

CASE STUDY

A Practical Completion Inspection revealed this brickwork which should have been rendered. Not visible from ground level but all part of the inspection process for Bestwest Building.

CASE STUDY

Do all Building Inspectors review the roof frame! Bestwest Building do and are able to provide a detailed explanation to the defect in this photo!

Bestwest Building Inspection Services

Building Inspections are an important part of buying a property and should be undertaken as early in the buying process as practicable. The purchaser will then know about the condition of the property and will be able to make a more informed decision as to whether to proceed with the purchase or renegotiate.

Ensure you use an Inspector that’s qualified and experienced to carry out your building inspections as the quality of Home Inspections in Perth can vary considerably.

There is an Australian Standard for Pre Purchase Building Inspections, AS4349.1 which applies to all Building Inspections in Perth and requires that “the person carrying out a property inspection should be a suitably qualified and experience”. There is not a government department in WA that issues licenses or certifies inspectors for the role.

The Truth: Experience, knowledge and thoroughness vary from inspector to inspector. A person is not qualified as a home inspector just because he or she claims the title. In WA a building inspector doesn’t even require a license. Therefore, it is important to do your homework when evaluating home inspectors. Be sure to visit their website and also give them a call to talk. Ask about what services they provide and how much experience they have in the building industry. Check their website for a sample report or ask to see one so that you can know what kind of report to expect. Not all home inspectors are created equal and it is up to the client to do their research and find a good one.

Pre Purchase Building Inspections

Pre Purchase Building Inspections

Pre Purchase Timber Pest Inspections

Pre Purchase Timber Pest Inspections

Brickwork and Roof Frame Inspections

Brickwork and Roof Frame Inspections

Practical Completion Inspections

Practical Completion Inspections

Waterproofing Inspections

Waterproofing Inspections

Bush Fire Attack Level Construction Inspections

Bush Fire Attack Level Construction Inspections

Slab Inspections

Slab Inspections

Free 24/7 Quote