Questions? Call Us Now!

Questions? Call Us Now!

George at Bestwest Building Inspections

George at Bestwest Building Inspections

CASE STUDY

A load bearing hanging beam which no support. An inspection from the manhole (loft hatch) would not have identified this defect so make sure your inspector enters the roof space.

George at Bestwest Building Inspections

CASE STUDY

There were dozens of BCA non compliance defects on this roof frame. Upon receipt of the Bestwest Building's report the Builder acknowledged the defects and rectified to satisfy the Building Code of Australia.

George at Bestwest Building Inspections

CASE STUDY

This isn't rocket science, a hanging beam is a structural member and clearly this has been compromised.

George at Bestwest Building Inspections

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

George at Bestwest Building Inspections

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until [email protected] had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

George at Bestwest Building Inspections

CASE STUDY

A Practical Completion Inspection revealed this brickwork which should have been rendered. Not visible from ground level but all part of the inspection process for Bestwest Building.

George at Bestwest Building Inspections

CASE STUDY

Do all Building Inspectors review the roof frame! Bestwest Building do and are able to provide a detailed explanation to the defect in this photo!

George at Bestwest Building Inspections

IMG_6009

Building and Pest Inspections are an essential part of the process when buying a property to ensure you are informed about your investment.

George has a trade background as a licensed plumber benefiting from experience in building, renovations, alterations and new construction. George is a proficient building inspector and continues to extend his knowledge of the building and construction industry with further study of the Construction and Building Diploma. Passing through 100’s of houses each year George has become an invaluable member of the Bestwest Building Inspection team.

In particular George’s trade base and knowledge of the BCA requirements for water, sanitary fittings and hot water heaters has enhanced an already industry leading standard of independent building inspections which adds great value to our premium service. George’s daily exposure to BCA non compliance in the housing market throughout Perth has resulted in many of his reports quoting the appropriate BCA reference to provide additional awareness to our customers.

Assuming access is available we always inspects the roof space, roof exterior and sub floor on existing houses. On new homes during a Practical Completion inspection, We are yet to find a timber roof frame which fully complies with the BCA.

Bestwest Building Inspections has a 24/7 online quote facility providing instant quotes with example reports & an online booking facility. Reports with digital photos are emailed with 24 hours of the inspection and usually same day.

With our tried and tested inspection process which exceeds Australian Standards AS4349, Bestwest Building provides premium building inspections/reports throughout Perth, Mandurah and Yanchep area. Our inspection team process ensures that the whole team will consider significant defects to ensure a consistent and objective service is provided to our customer. Obtain an instant quote now.

Receive Your Instant Quote
To Your Email. Available 24/7

Receive Your Instant Quote
To Your Email. Available 24/7

Or  Phone Icon  08 9444 9562