Pre Purchase Building Inspection

Pre Purchase Building Inspection

Pre Purchase Building Inspection

CASE STUDY

A load bearing hanging beam which no support. An inspection from the manhole (loft hatch) would not have identified this defect so make sure your inspector enters the roof space.

Pre Purchase Building Inspection

CASE STUDY

There were dozens of BCA non compliance defects on this roof frame. Upon receipt of the Bestwest Building's report the Builder acknowledged the defects and rectified to satisfy the Building Code of Australia.

Pre Purchase Building Inspection

CASE STUDY

This isn't rocket science, a hanging beam is a structural member and clearly this has been compromised.

Pre Purchase Building Inspection

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until Mark@Bestwest had carried inspected the property this damage had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

Pre Purchase Building Inspection

CASE STUDY

At a glance it's just a crack in the back of the garage. A closer review reveals much more and is a significant structural defect. Until Mark @ Bestwest had carried out an inspection, the damage at this property had gone unnoticed. Don't leave it to chance, call Bestwest Building for all your Building Inspection requirements.

Pre Purchase Building Inspection

CASE STUDY

A Practical Completion Inspection revealed this brickwork which should have been rendered. Not visible from ground level but all part of the inspection process for Bestwest Building.

Termite infestation - structural defects

Pre Purchase Building Inspection

CASE STUDY

Do all Building Inspectors review the roof frame! Bestwest Building do and are able to provide a detailed explanation to the defect in this photo!

Pre Purchase Building Inspection